Below are a few things that I've designed..

NEW!
The Team Series for K2 Snowboarding will be on store shelves for the fall of this year.. The whole line is designed to take on the rigors of travelling the globe.. Made of abrasion resistant fabrics.. reinforced and double stitched in key areas.. This black/gold limited edition colorway will only be available for sponsored riders..

UPDATED
The RC Ammo Bag is based on the military amunition box. It has a signature flip-top cover and is designed to carry a small laptop computer. There are multiple pockets to hold the charger and other cables. I incorporated a hidden slide-out pocket designed to hold a cell/pda. The whole bag is padded to protect what's inside.

The G73 Pano Pinhole 35 camera (click here for full details) is designed to use 35mm film, and to produce a panoramic aspect image. The exposure comes via a 0.03mm pinhole. This prototype was produced from found/scrap parts and black foamcore board..

UPDATED
The RC Flakpak is based on the F-22 Raptor. I've designed the exterior doors to mimic the Raptor's payload doors. The bag has wing flap and rocket inspired styling. Inside the bag's payload doors are flush mounted pockets for all your accessories. This bag is designed to carry mid to large sized laptops, with plenty of extra storage for books, spare batteries and charger. The bag is armored to keep your electronics from getting dinged.

The RC K.I.S.S. Driver is a snowboard tool pared down to the bare minimums. K.I.S.S. stands for 'Keep It Super Simple'. It has a #2 and #3 Phillips bit, an 8mm and 10mm wrench, a popout arm for lace tightening and for extra leverage (it also doubles as a bottle opener for après-riding). It all fits in a nice small package.

Part of the Urb Series, the RC Pack1 is the designed to carry all your urban gear. Specific compartments for your laptop and audio gear. Multiple pockets for all your accessories. Also a skateboard carry system with abrasion resistant panels. The shoulder straps are designed for comfort and proper ergonomics. Comes with stashable waist and sternum straps.

In the middle of the Urb Series, the RC Pack2 is also designed to carry all your urban gear. Specific compartment for your audio gear and organizer panel to keep your accessories in place. Nice big accessory pockets for more gear. This bag will also carry a skateboard, with a stashable strap when not in use. Ergonomic shoulder straps and stashable waist strap.

 The RC Pack3 is the pricepoint bag in the Urb Series, yet is still a fully functional urban gear bag. With an organizer, magazine, and audio pocket, your urban needs are met. Big main compartment, and large side accessory pockets.

The RC DJ25 is a dj bag that is designed to carry 25+ records. There are two hidden exterior pockets at the bottom front of the bag which can be used to transport your music player and extra disks/memory. I've incorporated an integrated cord port and headphone-carry strap to make the portable music listening experience easier. There are also two inner pockets and multiple mesh pockets for cords, spare needles, and other accessories. The bag is fully padded to protect your goods.

The RC .223 is a small shoulder bag designed to carry all you electronic gear in an urban environment. It is fully padded with high density foam, to protect your valuable gear from dings. Multiple pockets for cell, audio player, digital camera, pda, spare batteries, etc. The bag opens via top loader style, and it also has a special "jacknife" feature, which allows the bag to open on a hinge, allowing you to access the lower pockets with ease.

The RC Goggle Box is designed to be crush resistant to protect your expensive goggles from damage. It is lined with fleece to keep your lenses from getting scratched. There is an extra sleeve located inside to store your extra lenses.

I took the RC Flak logo (which is the letter "R" and "C" in the shape of a sub-machine gun), and stretched out into long-gun for to make the Flak M50 logo. We used M50 t for the screens on our canvas wristbands..

The RC Frag Keychain is a leather pad in a grenade shape. I think what makes this work is the keyring. It completes the grenade look.

Designed the RC Summer 2004 Catalog. A multi-page print with men's items on one side, and women's items on the flipside. Came up with the "angular/military" look for the men's section, and the "disco/bubblegum" look for the women's section. Took all the lifestyle photos and product shots, and edited all the layout and copy. Designed the RC "Flak" logo and the RC "Urb" logo, which are stylized letters.. R and C. All products in the catalog were designed by me: Golgo73.

The RC Gina Bag comes in three different sizes. Small, medium and large. The one pictured below is the medium version. The Gina is based on an asymmetrical flavor. Inside the bag, you'll find organizer pockets for a cell, lipstick, eyeliner, cards, pda/music player, and other necessities.

I tried to give the RC Heather Pack a nice clean look. There are no unnecessary parts dangling from the bag. The pack has a 'fastback' design, and the shoulder straps are ergonomically designed to fit a woman's anatomy. Internally, things are kept organized with interior cargo pockets. The Heather Pack has enough storage for a short day trip in the city, but is just small enough so it doesn't look bulky.

The RC Claire Bag is designed to be small, yet carry your essentials: lipstick, cell, credit cards, etc. Built-in mirror on the front left pocket for those quick makeup checks.

The RC Daphne Purse is minimalist and small. Good for clubbing. Can be carried as a clutch purse, or can be converted into a small shoulder bag (via a slim shoulder strap that is stored inside the purse) for dance floor mode.

The RC Survivor Chest Pack was designed to carry your 2-way radio, along with the 10 essentials when travelling in the wilderness. A zippered flap opens to reveal a water proof map pocket, and more internal storage.

 The RC 2-Way Radio Harness was designed to carry your 2-way radio. There's a gussetted main pocket for your extra essentials, plus a smaller pocket for spare batteries.

 The RC Bondcountry is designed to carry a board vertically or horizontally, and can also carry a pair of ski diagonally. It will also carry a shovel, ice-axe, and probe. It also comes with a compass and thermometer which are conveniently located on each waist belt pocket. The pack is hydration system compatible. Plenty of accessory pockets, including a velvet lined sunglass/goggle pocket. Made of a combination of 250d nylon ripstop, 600d polyester, and hypalon reinforcement..

 The RC Jackal Pack is a 'Jack of all trades' type of bag. It is designed to work in winter or summer conditions. The bag has hidden snowboard-carry straps and a fully sized, fleece-lined goggle pocket for winter use. The pack also has a bike-safe features and a forced-air cooling system for the summer use. As the biker wearing the Jackal Pack hunches over while riding their bike, air is forced into tubes mounted on the shoulder straps. In turn, the air is pushed out the other end of the tubes, which blows stale air away from the user's back. This increased circulation of air, in combination with a suspended mesh back panel, keeps the wearer's back comfortable and relatively sweat-free. This bag also comes in a women's version called the RC Jill Pack. The main difference is that the bag is slightly shorter and comes with ladies-specific shoulder straps.

 The RC Highboard Bag is a fully padded snowboard bag that will fit a board/s up to 178cm long. Made of durable 600d polyesters. Large zippers, exterior carge pockets, internal gear pockets and compression straps, beefy grab handles, and in-line wheels make this a great bag.

The RC Nappy Sack was designed to be a board case as well as a sleeping bag. When fnappysack the bag is in board-carry mode. When fully unzipped, the bag becomes an indoor sleeping bag. The Nappy Sack is fully padded, so it's quite comfortable to lie in. The sleeping pocket is fully fleece lined, and can be zipped out for washing. The sleep pocket is separated by a waterproof divider, so wet boards won't result in a wet sleeping bag. Will fit boards up to 175cm. Great for crashing at a friends cabin/hotel room.

The RC Teamworks is based on the French TGV. RC needed a bag that could carry both skis and snowboards, so I came up with this two-tiered design. Initially it was just this huge coffin, but I decided to streamline it, and tried to make it look smaller than it actually is. It can hold two pairs of skis up to 190cm in the bottom section, and 2 snowboards (1 with bindings, and 1 without) up to 168cm in length, in the upper section. It is fully padded, and has eurethane wheels for easy transport.

 The Drag-on Bag was designed to be a spartan rolling-type board bag.. Fully padded with wheels for easy and safe transportation of your boards (will hold up to 2 boards) and extra gear.. Will fit boards up to 175cm long..

 The Banger Bag was designed to be a fully padded board case sans-wheels.. With a lot of real-estate on the front panel for customized artwork/logo. Will fit a board up to 170cm..

 The RC Rover Case is designed to be used as a carry-on bag for airline travel. Measuring 52 x 39 x 22cm, it will be accepted onboard most airline carriers. Fitted with wheels and a locking telescopic handle, this bag can cruise through tight airport traffic. Features internal shoe pockets, mesh toiletries pocket, spine pockets, clothes keeper system, and multiple exterior pockets. Also comes with a detachable pocket cluster which can transform into a clutch bag, or can also hang from the airline seat pocket, acting as your portable entertainment system.

 In honor of Mr. Dressup: the RC Tickle Trunk is a large rolling duffle which can carry a lot of gear. A locking telescopic handle makes steering this big roller easy. You can access the bag from a top zipper panel, and the bag also opens up clamshell style for easy packing. Mesh dividers keep everything inside. Comes with a wet/dry bag, base rails, adjustable shoulder pad, and exterior cargo pocket.

[back]
..